C6830A
v1.0, C6830B V1.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 16S LiPo,18S LiFe,24S LiTo battery
1~30Amps 1500W max.
www.chargery.com
page
7
total
20
7.
Setup the charger work at Auto mode (only for C6830B)
,
Finish all charge settings, alternate Auto charge YES and press Knob
for 3 seconds, the charger will start to charge, and work at Auto
mode in future till disable it.
When the charger work at Auto mode, what you need to do is
connect the AC power and battery to the charger. The charger will
operate at last settings.
On Auto interface, press Knob for 3 seconds alternate to Idle mode.
If need not charge as last settings, pleaser set up Auto Charge is NO
8.
During charge, many charge information is displayed as below
9.
Similar with LiPo charge setup, you can setup LiIo, LiFe, LiTo, Pb battery and NiMH/NiCd.
10.
At any time Press
knob
shortly stop charging. The charger will work at idle mode to save power
consumption. Generally you needn’t disconnect it from AC outlet, because it only consume under
1W power at idle mode.
Tips
Battery voltage
Charge current
Capacity charged
Charge time
Internal temperature
Cell count, Battery Type, Charge status
C6830
