C3060A
v1.0, C3060B V1.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 7S LiPo, 8S LiFe battery
1~60Amps 1500W max.
www.chargery.com
page
17
total
19
Application Notes.
Storage Energy System
If C3060A/B charger applied to large capacity energy System such as PV system, C3060A is suggested, the
charge current can be controlled by remote device. The C3060A can receive PWM signal and adjust
charge current.
The current range is 1A to 60A.
When PWM duty cycle under 10%, C3060A will stop charging.
When PWM signal fail, the charger will charge at the settings by manual.
E-car or other E- Vehicle
When C3060A/B applied to E-boat or other E- Vehicle battery,
C3060B is suggested, and Auto charge
mode is the best, after setup all charge parameters and setup Auto Charge YES, the charger can charge
the battery automatically at any time. Need not any operation besides connect AC power source and
battery to the charger.
RC or UAV
When C3060A/B need charge multiply chemistry battery, C3060B is suggested, on normal work mode,
the charger is easy to set up for all kinds of battery. It is enough flexible to meet almost challenge.
