Chargerlab Power Z, Руководство пользователя

Страница: 5 / 8

Main screen2：Evaluate the line resistance of
the charge cables and the line compensate
ability of power adapter
Menu button
Ignore
Left|Right button Switch to other main screen
RDY Automatic calibrate when current is 0, RDY
indicate for ready to test . Connect load to
increase current for evaluate the line
performance.
0.000mΩ The resistance measured, the greater the
worse
GOOD Inferior Ordinary Good
Quality Gold Artifact evaluate line
compensate ability of power adapter
5.000V 0.000A
0.000mΩ
GOOD
RDY
4.856V 0.000A
5.00
1.00
V
0.00
0.00
A
Main screen3：Micro oscilloscope VBUS Curve
Menu button
Adjust the speed and type of curve
Left|Right button Switch to other main screen
Curve speed Total 4 levels, maximum 100SPS sample
speed
Curve type Can only display voltage or current, decrease
display speed
Main screen4：Micro oscilloscope D+、D-
Curve
Menu button
Test QC2.0、3.0 protocol
Left|Right button Switch to other screen
HVDCP Charge protocol information
Sniff mode Current support QC2.0，Q3. 0，will support
more protocols in future
9.056V 0.812A
D+3.28
D-0.60
HVDCP QC2.0 9V
Main screen4：QC2.0/3.0 Quick charge protocol
test
Menu button
Press to test QC2.0、3.0 protocol of power
adapter
Left|Right button Change voltage applied for
Warning If the phone or devices connected not
compatible for high voltage , force apply for
high voltage will cause irreversible damage to
the devices even burn them. Please test when
no load connect to any interface.
9.056V 0.812A
D+3.28
D-0.60
2.0
!