Hint: The paper label that is affixed to the hood is more easily removed when the hood is warm.
Any remaining glue residue can be cleaned off with a spray lubricant like WD-40.
Please Note, No Returns on Used Grills.
Attach
SIDE SHELF
to the four (4) holes on left
side of grill with 1/2" hex bolts and nuts.
Fig. L.
ATTACHING WARMING RACK PIVOT BOLTS:
On
each
END
of the
HOOD
just back of center, insert one (1) 2"
HEX BOLT
(total 2) (from outside in) in holes (A) with
HEX
NUTS
on inside of
HOOD.
Fig. M.
On each
END
of the
LOWER GRILL BODY
4" from the
back corner, insert one (1) 3/4"
HEX BOLT
(total 2) (from
outside in) in holes (B) and secure with
HEX NUTS
on
inside of
GRILL BODY. Fig. M.
DO NOT
install
WARMING RACK
until after tightning all
four
WARMING RACK PIVOT BOLTS.
ATTACH THE WARMING RACK’S
(4)
WIRE LOOP
HOLES
, located on the
WARMING RACK’S SIDES
and
WIRE LEGS
, over the four (4)
PIVOT BOLTS
in the
HOOD
and
GRILL BODY
. Attach left side first.
Hint:
You may flex the
WIRE LEG
outwards for a
tighter fit and to center.
Fig. M.
You may then attach a
hex nut to the pivot bolts in the hood to keep the
Warming Rack from sliding off of the pivot bolts,
(not shown).
Tighten
ALL
nuts and bolts.
Place
FIRE GRATE
, with
ADJUSTABLE HANGERS
attached, into
BOTTOM HALF
of grill body. (Note:
catch tabs may need to be bent out slightly to better
accommodate adjustable hangers).
Fig. K & L
install the
COOKING GRATES.
CONGRATULATIONS, ASSEMBLY COMPLETE!
14.
15.
16.
17.
2" Bolt
Pivot Leg Wire
3
/
4
Bolt
Hex Bolt
Side Shelf
Assembly
FIG. J
-5-
