OM1515 B.2
™ & © Char-Griller / A&J Mfg.
7
Step 4: Attach the other end of the LEG BRACES to the corresponding legs using 1 1/2”
Hex Bolts and Nuts but ONLY finger tight, see below.
(4) 1 1/2” Hex Bolts
(4)Hex Nuts
Hex Nuts
Hex Bolts
Hex Bolts
Step 5. Attach the WHEEL to the spindle coming out of the SHORT LEGS. Install
one WASHER, COTTER PIN and HUB CAP onto the spindle after the WHEEL.
Repeat this on the opposite SHORT LEG.
Axle
Wheel
Washer
Cotter Pin
Hub Cap
Short Leg
(2) Axle Cap
(2) Cotter Pin
(2) Flat Washer