OM1515 B.2
™ & © Char-Griller / A&J Mfg.
6
Step 3: Insert all four corners of the BOTTOM WIRE SHELF into the four holes located
near the bottom inside of the four LEGS. See below Next, rotate the LEGS upward until
vertical. Important: Make sure the two Long Legs are on the same end.
Step 2: Attach LEG BRACES to the outside of one of the LONG and SHORT LEG and
LEG CROSS BAR assemblies from step 1. See below. Use two 1 1/2" hex bolts and nuts
for each LEG BRACE but only finger tight.
(4) 1 1/2” Hex Bolts
(4) Hex Nuts
Hex Nuts
Leg Braces
Hex Bolts
Bottom Wire Shelf
