Page 11
7
• Place fiber washers on handle rods.
• Place the handle assembly into the holes on the front of the
smoker chamber door and secure with two
1/4-20
flange nuts.
• Repeat on firebox door.
• Insert spring handle through holes on the side of firebox and
secure with two
1/4-20
flange nuts.
Fully tighten all screws and nuts.
Handle
Fiber
Washer
Nut
Nut
Spring
Handle
Firebox
Handle Rod
Spring
8
• Remove
wing nut
from temperature gauge.
• Insert temperature gauge through smoker chamber lid hole
above handle securing it from the underside with the
wing
nut
removed above. Align the gauge before fully tightening.
Temperature
Gauge
Wing
Screw
Fiber
Washer
Handle
Содержание American Gourmet 12201595
Страница 15: ......