4
CAUTION
SPIDER ALERT!
SPIDER AND WEBS
INSIDE BURNER
TECHNICAL DATA
Appliance
Name
Total
Nominal
Gas
Category
I3B/P(30)
I3B/P(50)
Model No.
468
101715
Gas Type
Butane
Propane
Butane, Propane or their mixtures
Butane, Propane or their mixtures
Gas
Pressure
28-30 mbar
37 mbar
30 mbar
50 mbar
Grill: 0,71 x 2 pcs
Grill: 0,64 x 2 pcs
Destination
of countries
DK, NO, NL, SE, FI, RO, IS, CZ,
IT.SK
AT, DE, SK, CH, LU
GB, FR, IE, BE, ES, IT, PT, CZ, SK
CHAR-BROIL, LLC
Gas Barbeque/Gas Grill
4,4 kW ( 320,2g/h)
I3+(28-30/37)
Injector Size
(Dia. Mm)
Grill: 0,71 x2 Pcs
4682
017
15
Leak Testing Valves, Hose and Regulator
Leak test before first use, at least once a year, and every time
the cylinder is changed or disconnected.
1. Turn all appliance control knobs to .
2. Be sure regulator is tightly connected to gas cylinder.
3. Turn on Gas. If you hear a rushing sound, turn gas off
immediately. There is a major leak at the connection.
Correct before proceeding.
4. Brush soapy solution (mixture of half soap and half water)
onto hose connections.
5. If growing bubbles appear, there is a leak. Turn off gas at
cylinder immediately and check tightness of connections. If
leak cannot be stopped do not try to repair. Call for
replacement parts.
6. Always turn off gas at cylinder after performing leak test.
IF APPLIANCE FAILS TO LIGHT
Make sure gas is turned on at cylinder.
Make sure there is gas in the cylinder.
Does the ignitor make a sparking noise?
If yes check for spark at burner.
If no spark check for damaged or loose wires.
If wires are okay - check for cracked or broken electrode,
replace if needed.
If wire or electrodes are covered by cooking residue, clean
electrode tip with alcohol wipe if needed.
If needed replace wires.
If no sound check battery. Make sure battery is installed
correctly.
Check for loose wire connection at module and switch,
If ignitor continues to not work then use match.
If your barbeque is getting hard to light or the flame is weak,
check and clean the venturis and burners.
Spiders or small insects are known to create “flashback”
problems by building nests and laying eggs in the
barbeque’s venturi or burner obstructing the flow of gas. The
backed-up gas can ignite behind the control panel. This
flashback can damage your barbeque and cause injury. To
prevent flashbacks and ensure good performance, the
burner and venturi tube assembly should be removed and
cleaned whenever the barbeque has been idle for an
extended period of time.
Operation of Temperature Gauge
Press button to turn on or off.
Press and hold button to change from °C/°F or °F/°C.
Press the
1/2
button to switch between temperature reading for
side
1
and side
2
.
Содержание 468101715
