background image

WARNING

If “growing” bubbles appear do not use or move the LP 
cylinder. Contact an LP gas supplier or your fire 
department!

Connecting Regulator to the LP Cylinder

1.

LP cylinder must be properly secured onto grill. (Refer to 

assembly section.)

2.

Turn all control knobs to the OFF position.

3.

Turn LP cylinder OFF by turning hand-wheel clockwise to a 

full stop

.

4.

Remove the protective cap from LP cylinder valve. Always use 

cap and strap supplied with valve.

Safety Relief Valve

Nipple has to be centered
into the LP cylinder valve.

OPD Hand Wheel

Type 1 outlet with
thread on outside

ck

w

o

l

is

C

e

 

f

f

O

Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.

Strap and Cap

LP Cylinder Exchange

•Many retailers that sell grills offer you the option of replacing 

your empty LP cylinder through an exchange service. Use only 
those reputable exchange companies that inspect, precision fill, 
test and certify their cylinders. 

 Exchange your cylinder only 

for an OPD safety feature-equipped cylinder as described 
in the "LP Cylinder" section of this manual.

Always keep new and exchanged LP cylinders in upright 

position during use, transit or storage.

Leak test new and exchanged LP cylinders BEFORE 

connecting to grill.

LP Cylinder Leak Test

For your safety

Leak test must be repeated each time LP cylinder is exchanged 

or refilled.

Do not smoke during leak test.

Do not use an open flame to check for gas leaks.

Grill must be leak tested outdoors in a well-ventilated area, 

away from ignition sources such as gas fired or electrical 
appliances. During leak test, keep grill away from open flames 
or sparks.

•Use a clean paintbrush and a 50/50 mild soap and water 

solution. 

s

 Do not use household cleaning agents.

 Damage to gas 

train components can result.

Brush soapy solution onto areas indicated by arrows 

in figure below.

5.

Hold regulator and insert nipple into LP 

cylinder valve. Hand-tighten the 
coupling nut, holding regulator in a 
straight line with LP cylinder valve so 
as not to cross-thread the connection.

•Place dust cap on cylinder valve outlet whenever the cylinder is

not in use. Only install the type of dust cap on the cylinder valve
outlet that is provided with the cylinder valve. Other types of caps

 or plugs may result in leakage of propane.

9  

Содержание 466230712





































Отзывы: