19
Swing Away
�
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Swing Away is installed upside-down.
Grease Cup Clip and Grease Cup
�
Hang grease cup clip from bottom of firebox and place grease cup into grease clip.
20
Failure to install grease cup clip and cup
will cause hot grease to drip from bottom
of grill with risk of fire or property damage.
CAUTION
Grease Cup Clip
Grease Cup
21
LP Tank
�
LP tank is sold separately. Use only with an OPD
equipped LP tank. Fill and leak check before
attaching to grill and regulator.
�
Tank collar opening must face to front of grill.
Loosen wing nut from tank retainer bracket.
Set bottom of tank onto notches in the tank bracket.
Place tank retainer bracket onto tank collar and tighten
the wing nut.
(over-fill protection device)
See Use and Care section to correctly Leak Test and
perform the Burner Flame Check.
LP Tank
CAUTION
•
Failure to install tank correctly may allow gas hose to
be damaged in operation, resulting in the risk of fire.
LP Cylinder
(not included)
Regulator
Pivot Wire
Swing Away
27
