background image

This warranty only applies to units purchased from an authorized retailer. 
Manufacturer warrants to the 

original consumer-purchaser

 only that this product shall be free from defects in 

workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated 
below beginning on the date of purchase*.  The manufacturer reserves the right to require that defective parts be 
returned, postage and or freight pre-paid by the consumer for review and examination.

*Note:  A dated sales receipt WILL be required for warranty service. 

The original consumer-purchaser will be responsible for all shipping charges for parts replaced under the terms 
of this limited warranty.

This limited warranty is applicable in the United States and Canada only, is only available to the original owner of the 
product and is not transferable. Manufacturer requires proof of your date of purchase.  Therefore, you should retain your 
sales slip or invoice.  Registering your product is not a substitute for proof of purchase and the manufacturer is not 
responsible for or required to retain proof of purchase records.
This limited warranty applies to the functionality of the product ONLY and does not cover cosmetic issues such as 
scratches, dents, corrosions or discoloring by heat, abrasive and chemical cleaners or any tools used in the assembly or 
installation of the appliance, surface rust, or the discoloration of stainless steel surfaces. 

RUST is not considered a 

manufacturing or Materials defect. 

This limited warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage.  

ITEMS MANUFACTURER WILL NOT PAY FOR:

1. Shipping cost, standard or expedited, for warranty and replacement parts 
2. Service calls to your home.
3. Repairs when your product is used for other than normal, single-family household or residential use. 
4. Damage, failures, or operating difficulties  resulting from accident, alteration, careless handling, misuse, abuse, fire, 

flood, acts of God, improper installation or maintenance, installation not in accordance with electrical or plumbing 
codes, or use of products not approved by the manufacturer.

5. Any food loss due to product failures or operating difficulties.
6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
7. Pickup and delivery of your product.
8. Repairs to parts or systems resulting from unauthorized modifications made to the product.
9. The removal and/or reinstallation of your product. 

DISCLAIMER OF IMPLIED WARRANTIES and LIMITATION OF REMEDIES

Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty.  Manufacturer 
will not be responsible for any consequential or incidental damages arising from the breach of either this limited warranty 
or any applicable implied warranty, or for failure or damage resulting from acts of God, improper care and maintenance, 
grease fire, accident, alteration, replacement of parts by anyone other than Manufacturer, misuse, transportation, 
commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering), improper installation 
or installation not in accordance with local codes or printed manufacturer instructions. 
THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER.  NO PRODUCT 
PERFORMANCE SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY 
MANUFACTURER EXCEPT TO THE EXTENT SET FORTH IN THIS LIMITED WARRANTY.   ANY IMPLIED WARRANTY 
PROTECTION ARISING UNDER THE LAWS OF ANY STATE, INCLUDING IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN DURATION TO 
THE DURATION OF THIS LIMITED WARRANTY.

Neither dealers nor the retail establishment selling this product has any authority to make any additional 
warranties or to promise remedies in addition to or inconsistent with those stated above

.  Manufacturer's 

maximum liability

, in any event, shall not exceed the purchase price of the product paid by the original consumer.  

NOTE:  Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above 
limitations or exclusions may not apply to you.  This limited warranty gives you specific legal rights as set forth herein.  
You may also have other rights which vary from state to state.  In the state of California only, if refinishing or replacement 
of the product is not commercially practicable, the retailer selling this product or the Manufacturer will refund the purchase 
price paid for the product, less the amount directly attributable to use by the original consumer-purchaser prior to 
discovery of the nonconformity.  In addition, in the state of California only, you may take the product to the retail 
establishment selling this product in order to obtain performance under this limited warranty.

If you wish to obtain performance of any obligation under this limited warranty, you should write to:

Consumer Relations

P. O. Box 1240

Columbus, GA  31902-1240

Consumer returns will not be accepted unless a valid Return Authorization is first acquired.  Authorized returns are clearly 
marked on the outside of the package with an RA number and the package is shipped freight/postage pre-paid.  
Consumer returns that do not meet these standards will be refused. 

LIMITED WARRANTY

Scope of Coverage

Period of Coverage

Type of Failure Coverage

Parts

1 Year from date of purchase*

Perforation, Manufacturing, and
Materials Defects Only

LIMITED WARRANTY 

– 

REV. 102-1

STATEMENT 

14

Содержание 463870109

































Отзывы: