8
9
A
On the left leg, attach tank heat shield to the tank retainer bracket with
#10-
24x1/2" machine screws
and
#10-24 flange
nuts
. NOTE: Regulator and hose
come out by the heat shield.
B
Place firebox on cart by aligning burner tubes into valves. Make sure valves and
burner tubes are correctly engaged as shown. Attach main burner ignitor wire
from collector box to electronic ignition module.
C
Attach firebox to cart using
#10-24X1/2" machine
screws, fiber washers
and
#10-24 flange nuts
.
D
Insert
fiber washer
and
#10-24x1-1/4" screws
into each side of firebox. Inside
firebox attach
#10-24 flange nuts
to screws.
Sideburner Ignitor Wire
Main Burner Ignitor Wire
Valve
Burner Tube
Correct burner-to-valve engagement
Attach handle to lid with
fiber washers, square washer
and
wing nuts.
Wing Nut
Qty. 2
Fiber Washer
Qty: 2
A
B
Square Washer
Qty. 2
C
D
#10-24 X 1-1/4”
Machine Screw
Qty. 4
#10-24 X ½”
Machine Screw
Qty. 6
#10-24 Flange Nuts
Qty. 10
Fiber Washer
Qty: 8
463820308 • 17
