Char-Broil 463269311, Руководство по эксплуатации продукта

Страница: 17 / 32

3
A
B
Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using two
Attach light adapter to back panel using four #8-32x3/8” screws, 4mm lock washers, 4mm flat washers and #8 nuts,
1/4-20x1/2” screws and 7mm lock washers each side. Secure lower back panel to bottom shelf using one 1/4-20x1/2”
screw and 7mm lock washer, shown B .
4mm flat
#8 Nut
Adapter
#8-32x3/8”
4mm lock
screw
washer
washer
shown A .
Lower back panel
1/4-20x1/2”
screw
1/4-20x1/2”
screw
lock washer
7mm
lock washer
7mm
Adapter
4 Insert temperature gauge stem into the bigger hole above knob, shown A.
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, as
shown in B/C .
Temperature gauge
Temperature gauge stem
Control panel
C
B
Back of the panel
A
17