9
Insert sideburner burner into left shelf.
shelf, shown A.
The stud on bottom of burner fits into rear small hole in sideburner drip pan on
Secure burner to sideburner drip pan with one Wing nut, shown B. Make sure burner tube
engages sideburner valve, shown C.
B
17
A
Sideburner burner
Sideburner drip pan
Sideburner drip pan
Burner tube
Va
lve
C
Wing nut
8
First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8” screws and 4mm lock washers. Press sideburner control knob onto valve stem.
Control knob
Control knob bezel
Install bezel with “OFF” at top.
Sideburner
valve bracket
Screws and Washers
removed from valve bracket
Valve stem
#8-32x3/8” screw
4mm
lock washer
Sideburner
fascia
Note: Use left and right
holes on fascia to
attach valve bracket
Note: Use upper and lower
holes on fascia to
attach bezel
Содержание 463257110
Страница 26: ...NOTES 26 ...
Страница 27: ...27 Warranty Registration Department P O Box 1240 Columbus GA 31902 1240 ...
Страница 28: ......