Char-Broil 463232103, Инструкции по сборке и использованию

Страница: 6 / 16

6 • 463232103
ÔÚ
ÔÎ
ÎÎ
ÎÚ
Assembly ­ 463232103
• Unpack and remove all protective packaging.
1. Position bottom shelf with the Tank hole pattern to the left
side. See
Fig. 1
.
VERY IMPORTANT: The labels on the cart legs
indicate their assembly position to the bottom shelf.
LF LF
LF LF LF
=Left
Front
, LR LR LR LR LR
=Left Rear
, RF RF RF RF RF
=Right Front
, and RR RR RR RR RR
=Right
Rear
. Labels should face inward toward each other when
correctly assembled.
Remaining components cannot be
assembled if leg positions are incorrect
.
2. Install the four cart legs to the indicated corners of the
bottom shelf using 8 of the
1/4x2­1/2"
Phillips­head screws
provided. Do not fully tighten screws.
3. Install cross braces, facing inward, to cart legs on both
sides using 8 of the
1/4x1/2"
Phillips­head screws. Fully
tighten. See
Fig. 1
.
FIGURE 1
Cross
Brace
Bottom
Shelf
4. Screw the 4 casters into the caster seats in the bottom of
each cart leg. Turn the threaded caster stem by hand,
clockwise until it stops. Fully tighten with the wrench
provided. See
Fig. 2
.
5. Install the two side panels and one rear panel to the cart by
using 4 of the
3/16x1/2"
Phillips­head screws on each
panel. Leave rear panel screws loose. See
Fig. 2
.
FIGURE 2
Caster
Rear
panel
Side
panel
Side
panel
6. Attach the door bracket to the
lower holes
in the front legs
with the end tabs pointing upward and the flange to the rear,
pointing downward. Use 2 of the
1/4x1/2"
Phillips­head
screws. Do not fully tighten. See
Fig. 3
.
7. Place doors into the hinge holes of the bottom shelf and
door bracket. Push door bracket down until doors are
secure and can open and close freely. Do not fully tighten
door bracket screws. See
Fig. 3
.