background image

7

For Safe Use of Your Grill and to Avoid Serious
Injury:

NEVER

-Use grill at least 3 ft. from any wall or surface.

Apartment Dwellers:

NEVER attempt to light burner with lid closed. A
buildup of non-ignited gas inside a closed grill is
hazardous.

Never operate grill with LP cylinder out of correct
position specified in assembly instructions.

Always close LP cylinder valve and remove coupling
nut before moving LP cylinder from specified
operation position.

-Do not let children operate or play near grill.
-Keep grill area clear and free from materials that burn.
-Do not block holes in sides or back of grill.
-Check burner flames regularly.
-Use grill only in well-ventilated space.

use in

enclosed space such as carport, garage, porch, covered
patio, or under an overhead structure of ant kind.

-Do not use charcoal or ceramic briquets in a gas grill.

(Unless briquets are supplied with your grill)

Maintain 10ft. clearance to objects that can catch fir or
sources of ignition such as pilot lights on water heaters,
live electrical appliances, etc.

Check with apartment management to learn the
requirements and fire codes for using an LP gas grill in
your apartment complex.  If allowed, use outside on the
ground floor with a three (3) foot clearance from walls or
rails.  Do not use on or under balconies.

WARNING

Never remove threaded orifice
at end of valve during leak
testing of valves.

Leak Testing Valves, Hoses and Regulator

1.

2. Be sure regulator is tightly connected to LP cylinder.

3. Completely open LP cylinder valve by turning hand wheel

counterclockwise.  If you hear a

, turn gas off

immediately. There is a major leak at the connection.

4. Brush soapy solution onto areas circled below.

Turn all control knobs to the OFF position.

Correct

before proceeding.

rushing sound

5. If “growing” bubbles appear there is a leak.  Close LP cylinder

valve immediately and retighten connections.  If leaks cannot
be stopped do not try to repair.  Call for replacement parts.
Order new parts by giving the serial, model number and name
and part number of items needed (see parts list) to the Grill
Service Center at  1-888-430-7870.

6. Always close LP cylinder valve after performing leak test by

turning hand wheel clockwise.

Содержание 4539937

























Отзывы: