5. Hold regulator, insert nipple (B) into LP tank valve. Hand tighten coupling nut, holding
regulator in a straight line (C) with LP tank valve so as not to cross thread the
connection.
6. Turn the coupling nut clockwise to tighten to a full solid stop. The regulator will seal on
the back-check feature in the LP tank valve, resulting in some resistance. An additional
one-half to three quarters turn is required to complete connection. Tighten by hand only
— do not use tools.
NOTE: If you cannot complete connection, disconnect regulator and repeat steps 5 and 6.
If you are still unable to complete the connection,
do not use this regulator!
WARNING
• Do not insert any tool or foreign object into the valve outlet or safety relief valve. You
may damage the valve and cause a leak. Leaking propane may result in explosion, fire,
severe personal injury, or death.
• Never attempt to attach this appliance to the self-contained LP gas system of a camper
or trailer or motor home.
Hold coupling nut and regulator as shown
for proper connection to LP tank valve.
Nipple must be centered
into the LP tank valve.
B
C
Straight
10
