Char-Broil 10301565-26, Руководство по эксплуатации продукта

Страница: 10 / 16

5
6
Insert a small Hair Pin Clip into the hole at one end of the axle and bend the ends of the pin back so that it cannot be removed. Slide
a wheel onto the axle . Slide the axle through the holes at the ends of the short legs. Slide the remaining wheel onto the axle and
secure with the remaining Hair Pin Clip .
Finally, Push the wheel caps onto each end of the axle .
Place the firebox onto the cart . The butterfly
damper should be on you right hand side.
Insert 4 each 1/4-20X1 3/4" screws through
cart and firebox. Secure the firebox using 4
each 1/4-20 flange nuts . Insert screws from
outside, flange nuts from inside chamber.
FULLY TIGHTEN ALL SCREWS AND NUTS
AT THIS TIME.
Wheel Cap
1/4-20 Flange Nut
1/4-20x1 3/4" Screw
Page 10
Hair Pin Clip
Hair Pin
Clip