20016967
2
GB
1.
BURNER DESCRIPTION
One stage gas burner.
1.1
BURNER EQUIPMENT
Flange with insulating gasket . . . . . . . . No. 1
Screws and nuts for flange to be fixed to boiler . . . No. 4
Screw and nut for flange . . . . . . . . . . . No. 1
7 pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset connection . . . . . . . . . . . No. 1
1.2
ACCESSORIES
SOFTWARE DIAGNOSTIC KIT
A special kit is available that, by an optical link to a PC, shows the burner life together with operating hours, type
and number of failures, serial number, etc.
To visualise the diagnostics proceed as follows:
³
Connect the kit supplied separately to the control box socket.
Reading of the information begins when the software programme included in the kit starts.
REMOTE RESET KIT
The burner has a remote reset kit (
RS
) consisting of a connection and a push-button operating at a dis-
tance of 20 metres max.
In order to install it remove the protective lock-out installed at the factory and insert the lock-out supplied
with the burner (see electrical diagram on page 8).
MULTIBLOC ROTATION KIT
There is a special kit available that can be used to install the burner turned 180°, as illustrated on page 5 in
position 5 in the section entitled "
3.1 WORKING POSITION
". This kit is designed to ensure the gas train
valve works properly. The kit must be installed in conformity with laws and local regulations.
1
– Air pressure switch
2
– 6 pole socket for gas train
3
– Control box with 7 pole socket
4
– Reset button with lock-out lamp
5
– Flange with insulating gasket
6
– Air damper adjustment assembly
7
– Head holder assembly
8
– Pressure test point
9
– Motor
³
The burner meets protection level of IP X0D (IP 40), EN 60529.
³
CE marking according to Gas Appliance directive 90/396/EEC; PIN
0085AQ0409
.
According to Directives: EMC 89/336/EEC - 2004/108/EC, Low Voltage 73/23/EEC - 2006/95/EC and
Machines 98/37/EEC.
³
Gas train according to EN 676.
³
The burner is approved for intermittent operation as per Directive EN 676.
³
Note for Switzerland.
Swiss provisions, local and cantonal provisions, the provisions of the SVGW author-
ites for the use of gas, as well as those of the Fir Brigade (VKF), must all be complied with.
9
5
1
7
3
4
6
2
8
Fig. 1
D9707
