2
Model 6125
Coax extension
(not included)
Ceiling/Wall
Hole
Power supply
(included)
To Monitor
or
Video distribution
Power
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
5.16”
5.59”
2.20”
2.44”
Side view
Front view
Video
(BNC connector)
Installation:
h
h
h
h
Attach the camera mount to a wall or ceiling using the 3
screws provided.
Drill a hole in the wall or ceiling for wiring (see diagram).
If necessary, attach the camera’s video output to a coax
extension that is long enough to reach your monitor or
video distribution equipment.
If necessary, cut the connector off of the end of the power
supply and splice in an extension using crimp-on
connectors.
3
Specifications:
Camera Lens:
Resolution:
S/N Ratio:
Min Illumination:
Power Supply:
Power Consumption:
Video Output:
White Balance:
Scanning System:
Gamma Characteristic:
Waterproof criterion:
Dimensions:
Operating Temp:
3.6mm
540 lines
More than 48 dB
0.3 LUX @ F2.0 (Before IR is activated)
12VDC regulated
315 mA (total)
Camera: 95mA, LEDs: 220mA
1 Vp-p @ 75 ohms
Automatic
Interlaced 2:1
0.45
IP 68
2.44”Dia. x 5.16”L (without sunshield)
-10°C to 50°C (14°F to 122°F)
Specifications subject to change without notice.
Image Sensor:
Effective Pixels:
Auto Electronic Shutter:
Synchronous System:
1/3” High Resolution CCD
768 x 494
1/60s~1/100,000s
Internal, Negative Sync.
Features:
1/3” Sony CCD
540 Lines Of Resolution
0 Lux Sensitivity
3.6mm Lens
Power Supply Included
3-Axis Concealed Cable Bracket
Waterproof (IP68)
Sun Shield Included
All manuals and user guides at all-guides.com
