Source
C
V
H A N N E L
I S I O N
Pwr
2
Pwr/Source Button
... Keypad On/Off control and source selection
control when in multi-mode.
LED Indicators
... Can show volume level or source selection.
Top LED Indicator
... Flashes when IR signals are received.
IR Window
...
Receives signals from IR remote
controls.
Volume Controls
...
Increase or decrease volume level.
Features:
!
!
!
Compatible with all Channel Vision CAT5 audio systems
Supports IR control: compatible with the A0505 remote control
LEDs show volume level or source selection
The
is an amplified keypad for
single-source
and multi-source CAT5 audio systems. It provides convenient volume
control and source selection capabilities, while its elegant decorator
styling blends seamlessly with other wall switch devices.
AB-134
Channel Vision’s
11
Stripping and Connecting CAT5 Wire
Blade
Cat5
1.
Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
Slight
pressure
Rotate
1 turn only
2.
Rotate the tool only once. Multiple
turns will cause you to cut into the
inner wires.
3.
Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
Specifications:
Operating Temperature:
(typical @25º C)
-10ºC to +50ºC
Operating Voltage :
Cable requirements:
Speaker impedance:
IR repeating:
IR sensor range:
24VDC 2.3 Amps
CAT5 or better
6-8 ohm
30-60kHz
40’@40kHz, 25’@56kHz
Specifications subject to change without notice.
Green/White - Left Channel Audio Ground
Green - Left Channel Audio
Orange/White - Right Channel Audio Ground
Blue - IR Signal Voltage
Blue/White - IR Status Voltage
Orange - Right Channel Audio
Brown/White - Ground (24vDC Ground)
Brown - 24vDC
