1. Digital Input (D1 + Ground):
An alarm input for connecting devices that can toggle between an open and closed circuit, for example PIRs,
door/window contacts, broken glass detectors, etc. When a signal is received, the state changes and the input
becomes active.
2. Relay Output ( DO)
A selectable output for a relay switch, for example LEDs, Sirens, etc.
Normally Open and Normally Closed can be selected via the Internet Explorer ActiveX control under the “I/O
Setting” section on the left. (See pages 35, 36 for I/O settings)
3. Audio Output (
Ground)
An audio output that can be fed into an amplifier
4. Audio Input (Mic In + Ground)
A microphone input that can be used with a standard line level microphone, such as the 5104-Mic.
5. Video Out (Video Out + Ground)
Composite video output, used to adjust the camera. Note: if you do not have network connected, this output will
automatically shut off within 24 hours.
Audio Out
I/O Pin Out
5
PoE (Power Over Ethernet)
Power over Ethernet (PoE) is a technology that integrates power into a standard LAN infrastructure. It enables
power to be provided to the network device, such as an IP phone or a network camera, using the same cable
that is used for the network connection. The PoE switch eliminates the need for power outlets at the camera
locations and enables an easier application of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7
days a week operation. A 802.3af, 15.4W PoE Switch is recommended with 6565.
If using a PoE switch that does not meet this specification, full functionality may not be supported.