4.) Record Time Setting:
Pre Alarm and Post Alarm setups for record start and end time when motion is detected, or to trigger a relay.
Note: Pre/Post Alarm record time based on record time setting and 6543 or 6564's built-in memory. The
ability to store data is limited, so if the video quality is set very high, this will cause a drop in the recorded
FPS. This will also decrease pre or post recording time.
5.)
Network IP Check:
This option serves two functions
.
One, it checks your internet connection (Interval) to make sure your
network connection has not been lost. Two, if your connection is lost, you can set this to automatically
record to the SD card until it is full.
“IP Check”
enables or disables this feature.
“IP Address”
is what the camera will use to check if the internet is still working.
“Interval”
is how often the camera will test your internet connection.
“IP Check” (lower option)
has a box to check. When you check this box, you will record to your SD card
upon network failure.
Event List/cont.
35