7 | revision 013-1
www.channelsafety.co.uk
0845 884 7000 @ [email protected]
Silence Alarm Button
PRODUCT CODE
DESCRIPTION
F/EDA-T5100
Zerio Plus radio silence alarm button (zonal hush
button)
The EDA-T5100 is a silence button for use with the Zerio Plus Wireless Fire
Alarm System.
This unit is designed for use when the Zerio Plus system is setup using the
HMO mode.
It allows the system to be silenced within a HMO
dwelling in the event of a false alarm before the rest of the fi re alarm
system is activated.
SPECIFICATIONS
Temperature Range
0°C to +60°C
Humidity
0 to 95% (no condensation)
Transmitter Frequency
868 MHz
Transmission Type
Narrow band FM
Channels
13 available
Audible Warning
Beeps when button pressed test
mode
Indications
Fault - red fl ashing
Button pressed - red fl ashing
Battery
x1 EDA-Q690
Weight
140g
Product Dimensions
• Height
90mm
• Width
90mm
• Depth
30mm
SPECIFICATIONS
Temperature Range
0°C to +60°C
Humidity
0 to 95% (no condensation)
Transmitter Frequency
868 MHz
Transmission Type
Narrow band FM
Channels
13 available
Audible Warning
Sounds in alarm and test mode
Battery
1 x 12V 7AH (for booster only)
Booster Panel and Antennas
PRODUCT CODE
DESCRIPTION
F/EDA-Z6000
Zerio Plus booster panel (requires 240V supply and
24V 7Ah battery F/CH12/7)
F/EDA-Z6010
Zerio Plus hard wired booster panel
F/EDA-Z5008SZ
Zerio Plus wired remote display (standard
enclosure)
F/EDA-Y5000
High gain antenna for use with Zerio plus
The Zerio Plus Wireless Signal Booster Panel is designed to relay radio
signals from the main control panel around the site to the peripheral
devices and other booster panels.
The EDA-Z6010 Wired Intelligent Antenna is designed for use with the
Zerio Plus range of control panels. This unit is designed to be hard wired
from the main control panel and positioned in areas where the signal
strength from the main control panel is low.
The EDA-Y5000 Zerio Plus Antenna is a dipole type antenna with 2.5 metre
pre-terminated cable designed for use with the Zerio Plus range of control
panels.
This antenna replaces the stubby type antenna supplied with the
EDA-Z5008 & EDA-Z5020 panels and is designed to increase the signal
strength of the wireless fi re alarm system.
Image shows; from left to right F/EDA-Y5000 , F/EDA-Z6010 & F/EDA-Z6000
