HDMI source, with snowy
pixels in full screen
The input source is not standard
Plug the HDMI cable again
The remote control does
not work
Batteries are improperly installed or
exhausted
1. Make sure the positive and
the negative polarities are
correct.
2.Check whether there is a
loose contact between the
batteries and the springs
3.Replace the batteries
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the life of
your new TV. Be sure to turn the power off and unplug the power cord before you begin
any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the
cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on
your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not
to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a
good idea to unplug the power cord to protect against possible damage from
lightning or power surges.
Disposal of old electrical appliances
The waste directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be
disposed of in the normal unsorted municipal waste stream. Old appliances
must be collected separately in order to optimize the recovery and recycling of
the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
This equipment is a Class
Ⅱ
or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth.
Troubleshooting Guide
20
