Menu Operation
Configuring the Picture Menu
■
Picture Mode: You can select the type of picture which
best corresponds to your viewing requirements.
Mode: Changes the image mode.
Contrast: Adjusts the signal level between black and white
in the picture. You may use Contrast when the bright part
of the picture is saturated.
Brightness: Adjusts the base level of the signal in the
picture.
Sharpness: Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
Tint: Adjusts the balance between red and green levels.
(Only in the NTSC mode)
Saturation: Adjusts intensity of all colours.
The adjusted values are stored according to the User mode.
■
Color Temp: Select the color temperature of the picture.
■
Aspect Ratio: Select your desired aspect ratio. In some special signal, the image can
only display in the full mode.
■
DNR: Reduces screen noise without compromising video quality.
■
Backlight: To control the brightness of the screen, adjust the brightness of panel.
Configuring the Sound Menu
■
Sound Mode: You can select a sound mode to suit your
personal preferences.
adjusted when the SRS is set to On.
120Hz/500Hz/1.5KHz/5KHz/10KHz: Adjust the curve
of 5 bands equalizer.
Based on your favorites about which frequency band
need to be adjusted, make small adjustment with certain
frequency band at a time. Suggest NOT making too la
changes.
rge
The adjusted values are stored according to the User
mode.
■
Energy mode
: Switch the
Energy mode
on or off.
■
Energy demo
: Switch the
Energy demo
on or off.
the "Consumption" dial will appear on the TV screen.
While both Energ y Mode and Energy demo are set to "On",
12
Mode: Changes the Sound mode. Sound Mode can’t be
Backlight
can be
adjusted when the Energy mode is set to "Off".
