Basic Operation
Turning on and off the TV
■
Turn on the TV
Connect the power cable, and press the
button to turn on the TV.
■
Turn off the TV
Press the
button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
When there is an accident power off, it is recommended to unplug the power cable
from the power socket.
■
No signal
There is No Signal menu on screen when there is no input signal. In TV mode, if there
is no signal in 5 minutes, the TV will turn off automatically. In PC mode, the TV set will
automatically turn off in 30 seconds if no input signal. When VGA cable is connected,
the TV turns on automatically.
Programme Selection
■
Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
■
Using 0- 9 digital buttons and – button.
You can select the channel number by pressing 0 to 9. (In ATV mode)
In DTV mode, press number buttons and – button to select channel.
To tune the TV to a channel not programmed in the channel memory, you must use
the number buttons on the remote control.
■
Example
To select - channel (e.g. Channel 1): Press 1.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
To select --.- channel (e.g. Channel 20.1): Press 2, 0, – and 1 in a short time.
Volume Adjustment
■
Press the VOL+/- button to adjust the volume.
■
If you want to switch the sound OFF, press the
.
■
You can release mute by pressing the
or increase the volume.
Changing the Input Source
1. You can select the input source by pressing the
2. Press the
▲
/
▼
button to cycle through the input source, and press the ENTER button
to confirm your choice.
10
button on the remote
control.
