Basic Operation
QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
2. Press
Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the
◄
/
►
button to select the desired OSD (On Screen Display) language.
LCN
Country
Press the
◄
/
►
button to select the country you want to.
Tuner Type
Press the
◄
/
►
button to select Antenna or Cable.
Auto Scan
Press the
◄
/
►
button to select mode: DTV+ATV, DTV, ATV.
When selecting Cable: A step appears allowing you to set parameters to the channels.
For more information, refer to Channel (Auto Scan).
Turning on and off the TV
• Turn on the TV
• Turn off the TV
Press the
button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
set will automatically turn off in
5
minute
s
if no input signal. When VGA cable is
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
button on remote control can turn on TV from standby mode.
Press the
If TV has a power switch, turn it on firstly.
Connect the AC input cable.
if there is no signal in
1
5 minutes, the TV will turn off automatically. In PC mode, the TV
Press the
◄
/
►
button to select
On
or
Off
.
Mode Setting
Press the
◄
/
►
button to select Home Mode or Store Mode.
9
E
ngli
sh
