Chandler AMETEK 5617, Инструкция по эксплуатации

Страница: 8 / 42

PREFACE P-3
Safety Requirements
READ BEFORE ATTEMPTING OPERATION OF INSTRUMENT
The Chandler Engineering Model 5617 Corrosion Test Apparatus is designed for operator
safety. Any instrument that is capable of high temperatures and pressures should always be
operated with
CAUTION !!
To ensure safety:
•
Locate the instrument in a low traffic area.
•
Post signs where the instrument is being operated to warn non-operating personnel.
•
Read and understand instructions before attempting instrument operation.
•
Observe caution notes!
•
Observe and follow the warning labels on the instrument.
•
Never exceed the instrument maximum temperature and pressure ratings.
•
Always disconnect main power to the instrument before attempting any repair.
•
Turn off the heater at completion of each test.
•
Appropriately rated fire extinguishers should be located within close proximity.
•
Note that the flash point of the mineral oil used in this instrument is less than the
maximum operating temperature of the instrument. The auto ignition temperature of the
mineral oil is at or above the maximum operating temperature. When operating the
instrument at the maximum operating temperature, take appropriate steps to minimize the
chance of fire if a leak should develop.
Where to Find Help
In the event of problems, contact your local sales representative or Chandler Engineering:
•
Telephone: 918-250-7200
•
Fax: 918-459-0165
•
E-mail: chandler.sales@ametek.com
•
Website: www.chandlereng.com
Instrument training classes are also available.