5
UM TGMC-120117
000001
Chandler Limited
TG MICROPHONE CASSET
TE
INPUT
OUTPUT
COMPRESSOR
PRE AMP/EQ
INPUT
OUTPUT
PRE AMP/EQ
PIN 1) 0v
PIN 2) 48v
PIN 3) +28v
PIN 4) -28v
DC POWER
LINK
MICROPHONE CASSETTE
TIP- CV
SLEEVE- 0v
INSTALLATION
Power
The TG Microphone Cassette is powered remotely by the
Chandler Limited
PSU-1
power supply, and connected at the,
four pin,
DC POWER
connector. The PSU-1 is an external
power supply capable of powering two units; the PSU-1 is
purchased separately.
Note:
Legacy PSU-1 power supplies featured external
grounding studs. As of mid 2015, grounding studs have been
removed and resistance applied internally.
Audio Input & Output Connections
On the rear panel of the TG Microphone Cassette exists,
two sets of male and female XLR connectors, one pair for
the
Pre Amp/EQ
section and the other for independent ac-
cess of the
Compressor
. All audio XLR connectors are wired
pin 2 hot.
Note:
To include the TG1 Opto in the audio path, a short
XLR cable must be patched from the
Pre Amp/EQ
output
XLR to the
Compressor
input XLR connector.
Link
Provision has been made for stereo linking of two TG1 Opto
compressors, by means of the female ¼”
LINK
connector lo-
cated on the rear of the unit, and using a standard ¼” cable.
For further notes on operation under linked conditions, re-
view the “Link Operation” section within the “TG1 Opto”
portion of this manual.
Note:
Link cable purchased separately.
PSU-1 POWER SUPPLY
FUSE
FUSE 1.5 AMPS 250 V
DC POWER TO EQUIPMENT
AC POWER
PIN 1) 0v
PIN 4) -28v
PIN 2) 48v
PIN 3) +28v
DC POWER CABLE - 4 PIN XLR
LINK - USE STANDARD 1/4” TIP - SLEEVE CABLE
CV
0v
