Page 12
As previously mentioned the Hold control on the 1969 module
acts as a back off system to the Limiter side chain. Turning
the knob clockwise will give you more gain reduction. You will
notice that as the knob is turned to the left the meter rises as
the threshold point of the Limiter is reduced. For example if the
needle is set at -5 you will have the potential of 8db reduction.
Hold (TG12413 1969 Module Only)
The Input control functions as your input gain/threshold switch
which simply drives the Limiter harder as you turn it up. This
control emulates the 21-position switch available as a special
order option on the Chandler Limited/Abbey Road Special
Edition TG1 hardware. Its specially designed taper provides
smoother control at lower settings. Crank this up to really hear
the unit pump!
Input (TG12413 2005 Module Only)
Output
This is a 21-position switch set to 1 dB steps /-10dB of output adjustment for level
matching as well as accurate, recallable gain make-up. Use this with the bypass control to
set unity output from the unit.
Fig. 8 — 1969 Module
Fig. 9 — 2005 Module
Fig. 6 — 1969 Module
Fig. 7 — 2005 Module
