Champtek IG300BT, Руководство пользователя, Страница: 17 / 79

12
When a barcode is detected, the lighting automatically
turns on and stays on until another period of inactivity
(timeout).
After the timeout the scan engine starts flashing again.
Level + Flashing
This mode allows you the switch between level and
flashing mode.
When the scanner is turned on it is in flashing mode
(see flashing mode for explanation).
You can automatically switch to level mode by
activating the beam line.
After a period of inactivity lasting the time specified by
the timeout the scan engine switches back to flashing
mode.
Flashing
Flashing mode allows power up the lighting and
decoding are on (no need to activate the trigger line)
and after a period of inactivity lasting the time specified
by the trigger timeout, the scanner starts flashing,
checking for a bar code to be read.
When a bar code is detected, the lighting and decoding
automatically turn on and stay on until another period
of inactivity (timeout), after the timeout the scanner
starts flashing again.
Autostand
This mode allows you to switch from Flashing trigger
mode to Level trigger mode.
Autostand begins in flashing mode: At power up the
lighting and decoding are on (no need to activate the
trigger line) and after a period of inactivity lasting the
time specified by the trigger timeout, the scanner starts
flashing.
To switch to Level trigger mode activate the trigger line
(press the trigger).