Champlain ACM-122 Скачать руководство пользователя страница 3

STEP 1

With the bottom 2 steps (P1) 
in the upright position, attach 
P2 using the 4 slots. Make 
sure that the locking pins have 
snapped into place (a rubber 
mallet can be used to insure 
proper installation).

E1

E2

STEP 3

Turn E2 right side up. Insert 
the remaining 2 posts (P6). 
Attach the top 2 steps (P5) 
and secure with 6 screws (2) 
and 6 nuts (3).

ÉTAPE 3

Retourner E2 à l’endroit. 
Insérer les 2 poteaux restants 
(P6). Attacher les 2 marches 
du haut (P5) avec 6 vis (2) et 
6 écrous (3).

E3

ACM-122

P1

P2

P3

P4

P6

P6

!

!

!

Installation:

Self-locking pin / Goupilles autobloquantes

E4

STEP 2

Turn E1 upside down and 
insert two P6 post into
openings (P2). Using P4 align 
the two P6 post into position 
and snap P4 into place.
Next, attach base P3 making 
sure locking pins snap 
securely in place.
Using a hammer, secure P2 
and P3 using 4 self-locking 
pins (1) as indicated.

ÉTAPE 1

Placer les marches du bas 
(P1) à l’endroit. Attacher P2 
avec les 4 fentes. 
Assurez-vous que les 4 
goupilles d’arrêt soient bien 
enclenchées (un maillet de 
caoutchouc peut être utilisé 
pour obtenir une installation 
adéquate)

ÉTAPE 2

Retourner E1 à l’envers et 
insérer 2 poteaux P6 dans les 
ouvertures (P2). Aligner P4 et 
les 2 poteaux P6 et enclencher. 
Vous assurer que les goupilles 
d’arrêt soient bien enclenchées 
pour attacher la base P3. En 
utilisant un marteau sécuriser 
P2 et P3 avec 4 goupilles 
autobloquantes (1) 
tel qu’indiqué.

STEP 4

Slide posts (P7) through arms 
(P9) and into post holes. 
Secure posts in place using 8 
screws (4). 

DO NOT secure 

arms (P9) to posts (P7) until 

adjusted to height of deck in 
Step 5.

Attach handrails (P8) to 
4 posts (P7) using 8 stainless 
steel screws (4). 

ÉTAPE 4

Glisser les poteaux (P7) à 
travers des bras (P9), l'insérer 
dans les supports de poteau et 
fixer avec 8 vis (4). 

Ne pas 

fixer le bras (P9) au poteau 
(P7) tant que l'ajustement à 

la hauteur du deck ne soit 

fait à l'étape 5. 

Attacher les rampes (P8) aux 
4 poteaux (P7) et attacher 
avec 8 vis en acier inoxydable 
(4). 

!

"

#

P5

P8

x 16

x 4

P7

P7

E2

!

"

#

$

$

x 6

x 6

P2

P4

P9

Отзывы: