13
V. Adjustments
1. Throwing Arm Limit Switch
WARNING: BEFORE MAKING ANY ADJUSTMENTS, MAKE SURE THE
THROWING ARM IS IN THE UNCOCKED POSITION, THE ON/OFF/SAFE
RELEASE SWITCH IS IN THE “OFF” POSITION, AND THE BATTERY IS
DISCONNECTED FROM THE TRAP.
The machine is set at the factory. Only make adjustments to the limit
switch if a target doesn‟t drop onto the throwing arm as the throwing arm is
cocking, or the throwing arm continuously fires. TEST MACHINE FIRST
WITHOUT ANY TARGETS.
1. The limit switch controls the stop position of the throwing arm during the traps
cocking cycle. The limit switch is located under the trap near the front. The
front cover can be removed to gain easier access to the switch. Replace cover
after adjusting switch.
Limit Switch
Front Cover
