7 OM00ELV8 Rev 3 effective 110118
New chair assembly
1.
Verify the handset connection plug is appropriately inserted into the receptacle suitable on
the electronic box found under the seat. (Figure 1)
Before switching the chair on, it should be checked whether condensation
(possible with a temperature change) is present on the electrical components.
If there is precipitation, then the chair has to be allowed to reach room
temperature.
The control box does not work without closing plugs that should be connected
tightly into the proper socket on the left side (Figure 1)
Power cable
Closing plug OR
Emergency stop
switch connector
Handset
connector
Motor connectors (*)
(In case of less motors
are connected end cap
must be connected)
Battery unit connector (*)
(In case of no Battery unit
end cap must be
connected)
Figure 1
Electronic control system
