11 OM00ELV8 Rev 3 effective 110118
IN-SERVICE PROCEDURES
Before chairs are put into service, all personnel should review this manual.
In the belief that an actual demonstration of the product is more effective than written instructions,
an on-site in-service by a Champion representative may be available depending upon the delivery
circumstances.
It is extremely important that chairs are operated properly and used in the manner in which they
were designed. Certain improper methods of operating the chair can damage the chair and void the
warranty. In the event that you do not receive your in-service packet, call customer service to
obtain one: 800-998-5018.
CAUTION: DO NOT overload chair. Observe the specified maximum weight
capacity for the chair model that you have selected.
OPERATING INSTRUCTIONS
Safe operation of the chair
Always check whether the power cord and the handset cable are intact
before switching the unit on.
For a long working life and in order to guarantee user safety, we recommend that the
following points be observed:
●
Position the chair in such a way that it is accessible from all sides and does not knock
against walls or other equipment when fully extended.
Not keeping safety distances around the chair during backrest adjustment could result in the
chair backrest being driven into the wall behind the chair, this may cause additional dynamic
overload on the backrest of the chair and lead to pivot bolt damage.
Emergency shut off of the chair:
In an emergency, disconnect the chair’s power plug and the battery plug
from control unit in order to shut off the chair. The power plug and
battery plug must always be accessible during operations so that it is
possible to shut down the chair at any time.
