background image

 

M

AINTAIN COMPRESSOR RELIABILITY AND PERFORMANCE WITH 

GENUINE CHAMPION

 

 

COMPRESSOR 

PARTS AND SUPPORT SERVICES 

 

Champion

  

Compressor genuine parts, manufactured to design tolerances, are developed for optimum 

dependability – specifically for Champion compressor systems.  Design and material innovations are the result 
of years of experience with hundreds of different compressor applications.  Reliability in materials and quality 
assurance are incorporated in our genuine replacement parts. 
 
Your authorized Champion Compressor distributor offers all the backup you’ll need.  A worldwide network of 
authorized distributors provides the finest product support in the air compressor industry.  
Your authorized distributor can support your Champion air compressor with these services: 
 
1.  Trained parts specialists to assist you in selecting the correct replacement parts. 

2.  Repair and maintenance kits designed with the necessary parts to simplify servicing your compressor. 
 
Authorized distributor service technicians are factory trained and skilled in compressor maintenance and repair.  
They are ready to respond and assist you by providing fast, expert maintenance and repair services. 

 

For the location of your local authorized 

Champion

 Air Compressor distributor, refer to the yellow 

pages of your phone directory or contact: 
 
 

Factory: 

Champion

 

1301 North Euclid Avenue 
Princeton, IL  61356 

 

Phone: (815) 

875-3321 

 

Fax: (815) 

872-0421 

E-Mail: Champion@Champion pneumatic . com 

 
 

INSTRUCTIONS FOR ORDERING REPAIR PARTS 

 

When ordering parts, specify Compressor MODEL, HORSEPOWER and SERIAL NUMBER (see nameplate on 
unit).  All orders for Parts should be placed with the nearest authorized distributor. 
 
Order by part number and description.  Reference numbers are for your convenience only. 

Содержание CCE10

































Отзывы: