Controls and Features
6
Rev 41115-20100317-E
Power Panel
(1) Ignition Switch
– Flip switch to the
“On” position to start the generator. Flip to
the “Off” position to turn off the generator.
(2) Circuit Breakers
– Protects the
generator against electrical overload.
(3) Voltmeter
– Displays the output
voltage of the generator.
(4) 120 /240 V 30 A Twist-Lock
–
Protected by a 25 A flip-to-reset circuit
breaker on each 120 Volt leg of the
receptacle. This receptacle powers 240 Volt
AC, single phase loads requiring up to 5000
watts. If an L14-30P plug is wired for only
one 120 Volt leg (3-wire connection) then
this receptacle powers 120 Volt AC, 60 Hz,
single phase loads requiring up to 20.8 A or
2500 Watts of power.
(5) 120 V 20 A Duplex
– Each duplex is
protected by a 20 A flip-to-reset circuit
breaker to operate 120 Volt AC, single phase,
60 Hz loads requiring up to 20 A 0r 2400
Watts of power.
(6) Ground Bolt –
Consult an electrician
for local grounding regulations.
Содержание 41115
