manualshive.com logo in svg

Champion 40911, Инструкция по эксплуатации

Поделиться
Скачать
Champion 40911 Скачать руководство пользователя страница 27

If you require parts or service assistance, please call the 

CHAMPION TRAPS AND TARGETS Customer Service Dept.  

at (800) 379-1732 

  

©

2015 CHAMPION TRAPS AND TARGETS, Anoka, Minnesota 55303

 

25 

 

Warranty Certificate

  

(Please fill out completely & return with a copy of the receipt)

  

 
Owner’s Name: _______________________________________________________ 

Owner’s Signature:_____________________________________________________ 

Address:   ___________________________________Ph #: ___________________ 

City:  _______________________________  State: _______    Zip: ______________ 

Date of Purchase:  ________________ 

Business Where Easybird 6-Packer Was Purchased:_____________________ 

 

WARRANTY CERTIFICATE 

Congratulations on the purchase of your new 

CHAMPION EASYBIRD 6-PACKER

 trap machine. Your new

 

EASYBIRD 6-PACKER

 is warranted to be free from defects in material or workmanship for a period of one (1) 

year from the date of purchase.  This warranty is extended only to the original consumer purchaser.  Should you 
believe that your 

CHAMPION EASYBIRD 6-PACKER

 is defective in material or workmanship, you should 

contact the 

CHAMPION TRAPS AND TARGETS

 

Customer Service Department via phone at 800-379-1732. 

In the event a warranty repair is required, all parts will be provided at no charge. THIS WARRANTY DOES 
NOT COVER DEFECTS OR DAMAGE RESULTING FROM: CARELESSNESS, MISUSE, IMPROPER 
INSTALLATION, MODIFICATION, OR NORMAL WEAR AND TEAR. 

IN ORDER FOR THIS WARRANTY TO BE IN EFFECT, 

YOU MUST FILL OUT THIS WARRANTY 

CERTIFICATE AND RETURN IT TO CHAMPION TRAPS AND TARGETS

 

WITHIN 30 DAYS OF PURCHASE

. 

THE WARRANTY CERTIFICATE MUST BE FILLED OUT COMPLETELY AND SIGNED BY THE OWNER IN 
ORDER TO BE VALID. WARRANTY SERVICES CANNOT BE PROVIDED WITHOUT MEETING THE ABOVE 
REQUIREMENT.  Retain a copy of this warranty certificate for future reference. THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF 
THIS LIMITED WARRANTY. 

CHAMPION TRAPS AND TARGETS 

IS NOT LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE 

PRICE OF THE PRODUCT AND UNDER NO CIRCUMSTANCES SHALL 

CHAMPION TRAPS AND TARGETS 

BE 

LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. HOWEVER, SOME STATES DO NOT ALLOW 
LIMITATIONS ON INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 
EXCLUSION MAY NOT APPLY TO YOU. 

The above warranty provides the sole and exclusive warranty available to the customer in the event of a defect in 

material or workmanship in the 

CHAMPION EASYBIRD 6-PACKER

.   This warranty gives you specific legal rights, and 

you may also have other rights which vary from State to State. 

 

CHAMPION TRAPS AND TARGETS 

1 VISTA WAY 

ANOKA, MN 55303 

1-800-379-1732 

www.championtarget.com 

Содержание 40911





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды