100693 - 7500W ELECTRIC START GENERATOR
IMPORTANT SAFETY INSTRUCTIONS
9
Operation Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYMBOL
MEANING
START
ON
STOP or OFF
SYMBOL
MEANING
Circuit Breaker Reset: Push
Locking Receptacle
Neutral Bonded to Frame.
Neutral
circuit
IS
electrically connected to the
frame/ground of the generator.
Quickstart Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine
!
DANGER
Move generator outside and far away from windows,
doors and intake ventilation covers.
1.
Check oil level.
Recommended oil is 10W-30.
2.
Check gasoline level.
When adding gasoline, use a minimum octane rating of 85
and an ethanol content of 10% or less by volume.
3. Turn the fuel valve to
“ON”
position.
4. Press ignition switch to the
“ON”
position.
5. Move choke lever to
“CHOKE”
position.
6. Pull the recoil cord.
7. Move the choke lever to
“RUN”
position.
8. Plug in desired device.
Stopping the Engine
1. Turn off and unplug all connected electrical loads.
2. Press the ignition switch to the
“OFF”
position.
3. Turn the fuel valve to the
“OFF”
position.
Electric Start
See page 17 in “Operation” section.
1
2
3
4
5
6
7
1
2
3
8
10W-30
!
!
1040-L-OP-E
K
CG1
376
152
2945
186
Colors
LPN
1040-L-OP
Rev
E
Size
243 x 35 mm
Artwork Notes
3mm corner radius; 2mm safe margin
Revision Changes
B: Reduce length 25 mm per Tyler
C: Swap the step 2 and 3 for stop per Tyler
D: Swap step 2 and 3 for stop per Scott S. to match
manual template
E: Fuel valve simplified/updated
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
