100683 - CURvED ShAfT TRiMMER
iMPORTANT SAfETY iNSTRUCTiONS
8
Operation Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
SYMBOL
MEANING
Choke.
Move choke lever to “RUN”
position. See Starting and Stopping
Section.
Choke.
Move choke lever to “CHOKE”
position. See Starting and Stopping
Section.
Quick Start Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
Starting the Engine
1.
Check fuel.
Make sure fuel-to-oil mixture is 50:1 and add
if necessary.
2.
Primer bulb:
2a. For cold starts, press primer bulb 7-10 times.
2b. For warm starts, DO NOT press primer bulb.
3. Move choke lever to
CHOKE
position.
4. Holding the unit firmly, pull starter handle until the engine
starts.
5. Press the throttle trigger lockout (top) and throttle trigger
(bottom) when the engine starts. This will automatically
move the choke lever to the RUN position. Once the engine
is running, release the throttle lockout and throttle trigger.
6. Allow the engine to idle for 30 seconds.
19
39
-L
-O
P-A
1
50 : 1
3
6
30 s
4
2
7-10X
5
Colors
LPN
1939-L-OP
Rev
A
Size
53 x 24 mm
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on
white substrate.
Revision Changes
---
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
2945
485
K
K:50
152
