8
100647 - ChAiNSAw
iMPORTANT SAfETY iNSTRUCTiONS
Top view
A
Safety Labels
These labels warn you of potential hazards that can cause serious injury. Read them carefully.
If a label comes off or becomes hard to read, contact Technical Support Team for possible replacement.
LaBEL
DESCRIPTION
a
17
86
-L
-SF-B
45
− Only use approved bar and chain combination.
− Bar/Chain Oregon, type 180SDEA041 / 91P063X.
− Sprocket (teeth × pitch): 6T × 0.375 in.
− Class 1C
− Use of non-approved bar, chain or sprocket will void
warranty, damage the saw and could cause physical
harm.
−
−
−
−
−
Utilisez uniquement la combinaison de barre et de
chaîne approuvée.
Bar / Chaîne Oregon, type 180SDEA041 / 91P063X.
Pignon (dents × pas) : 6T × 0,375 po.
Clase 1C
L’utilisation d’une barre, d’une chaine ou d’un
pignon non approuve annulera la garantie,
endommargera la scie et pourrait causer des
blessures.
WARNING
AVERTISSEMENT
---
Colors
LPN
1786-L-SF
Rev
B
Size
45 x 33 mm
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on white substrate
Revision Changes
B- revised lineart
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
K
2945
485
152
Safety Symbols
