manualshive.com logo in svg
background image

Electric Chain Saw

Operator’s Manual

MODELS:

ECS-2000 12" GUIDE BAR

WARNING 

 DANGER

Read rules for safe operation and instructions carefully. ECHO provides an Operator’s Manual and a
Safety Manual. Both must be read and understood for proper and safe operation.

Symbol Information ........................................................... 2
Safety Warnings ................................................................. 3

- Before Operating Chain Saw ................................... 3
- Kickback .................................................................. 3
- Pushback and Pull-in ................................................ 4
- Chain Saw Operation ............................................... 4
- Maintenance and Storage of Chain Saw .................. 4

Product Identification ......................................................... 5
Chain Saw Names and Terms ............................................. 5
Unpacking .......................................................................... 6
Assembly ............................................................................ 6
Saw Chain Tension Adjustment ......................................... 7
Filling Oil Tank .................................................................. 7

T

ABLE

 

OF

 C

ONTENTS

ECS-3000 16" GUIDE BAR

SERIAL NUMBER 200 & UP

SERIAL NUMBER 300 & UP

Operating Chain Saw .......................................................... 7

- Extension Cords ....................................................... 8
- Oiling Chain ............................................................. 8
- Cutting with the Chain Saw ..................................... 8
- Chain Brake .............................................................. 8
- Trimming a Tree ...................................................... 9
- Felling a Tree ........................................................... 9
- Limbing a Tree ....................................................... 10
- Bucking a Log ........................................................ 11

Cleaning and Maintenance ............................................... 12

- Cleaning Saw Body ................................................ 12
- Care of Guide Bar .................................................. 12
- Sharpening Saw Chain ........................................... 12

Storage .............................................................................. 14
Replacement Parts ............................................................ 14
Troubleshooting ................................................................ 15
Servicing Information ........................................ Back Cover

Содержание ECS-2000

















Отзывы: