100574 - 3500W DIGITAL HYBRID INVERTER GENERATOR
CONTROLS AND FEATURES
12
Control Panel
1.
Choke
– Used to start a cold engine.
2.
Fuel Selector Switch
– Used to select and turn on gasoline
or propane (LPG) fuel source.
3.
LPG Inlet
– Used to connect LPG fuel source to generator.
4.
Engine Switch
– Used to put in START mode or STOP the
generator. When operating by propane, this switch will NOT
stop the engine.
5.
Economy Mode Switch
– Enables/disables automatic idle
control.
6.
Output Indicator Light
– Remains ON during normal
operating conditions. Turns OFF when generator is
overloaded.
7.
Overload Indicator Light
– When ON generator is overloaded
and power to receptacles is cut.
8.
Oil Warning Indicator Light
– When ON engine will shut
down and not run. Check oil level.
9.
Parallel Outlets
– Used for parallel operation (parallel kit
sold separately).
10.
Ground Terminal
– Consult an electrician for local grounding
regulations.
11.
Circuit Breakers (Push Reset)
– Protects the generator
against electrical overloads.
RECEPTACLES
A
z
12V DC, 8 Amp (Automotive)
May be used to supply electrical power for
operation of 12 Volt DC, 8 Amp electrical loads.
B
t
120V AC, 30A RV (NEMA TT-30R)
May be used to supply electrical power for
operation of 120 Volt AC, 30 Amp, single phase,
60 Hz electrical loads.
C
A
(
2
×
) 120V AC, 20A (NEMA 5-20R)
May be used to supply electrical power for
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
1
4
6
11
8
9
2
3
A
5
7
10
B
C
