background image

100520 - 8750W PORTABLE INVERTER GENERATOR

SPECIfICATIONS

28

SPECIfICATIONS

Generator Specifications

Generator Model

 ...........................................

 100520

Start Type

 .........................................

Electric, Manual

Watts (Starting/Running)

 ..............................

 8750/7000

AC Volts

 .....................................................

120/240

AC Amps @ 120V

 ..............................................

58.3

AC Amps @ 240V

 ..............................................

29.2

DC Volts

 ..........................................................

12

DC Amps

 ............................................................

8

Frequency 

 .....................................................

60 Hz

Phase

 .........................................................

Single

Weight

 .............................................

149 lb. (67.5 kg)

Length

 ............................................

26.6 in. (67.5 cm)

Width 

 ..............................................

 25.6 in. (65 cm)

Height

 .............................................

23.7 in. (60.1 cm)

Engine Specifications

Model

 ..........................................................

R420

Displacement

 ................................................

420 cc

Type

 ...................................................

4-Stroke OHV

Spark Plug

OEM Type

 ..............................................

NHSP F6RTC

Replacement Type

 ......................

NGK BPR6ES or equivalent

Gap

 ..................................

0.028-0.031 in. (0.7-0.8 mm)

Valve

Intake Clearance

 ..................

0.002-0.004 in. (0.05-0.1 mm)

Exhaust Clearance

 ................

0.002-0.004 in. (0.05-0.1 mm)

 

NOTICE

A technical bulletin regarding valve adjustment procedures is 
available at www.championpowerequipment.com.

Oil Specifications

DO NOT OVERFILL.

Type

 ...............................................

*See chart below

Capacity

 ........................................

37.2 fl. oz. (1.2 qt.)

   -20

0

20

40

60

Ambient temperature

Recommended Engine Oil Type

80

100

120

         -28.9

°F
°C

       -17.8       -6.7         4.4

15.6      26.7    37.8

  48.9

10W-30

5W-30 Synthetic

10W-40

5W-30

 

NOTICE

Temperature will affect engine oil and engine performance. 
Change the type of engine oil used based on the temperature 
to suit the engine needs.

fuel Specifications

Use unleaded gasoline with a minimum octane rating of 85 and 
an ethanol content of 10% or less by volume. DO NOT USE E15 or 
E85. DO NOT OVERFILL.

Gasoline Capacity

 ....................................

4.2 gal. (16 L)

Temperature Specifications

Starting Temperature Range (°F/°C)

 ...........

5 to 104/-15 to 40

 

NOTICE

An important message about temperature:

 Your product 

is designed and rated for continuous operation at ambient 
temperatures up to 104°F (40°C). When needed, it may be 
operated at temperatures ranging from 5°F (-15°C) to 122°F 
(50°C) for short periods of time. If exposed to temperatures 
outside this range during storage, it should be brought back 
within this range before operation. In any event, the product 
must always be operated outdoors, in a well-ventilated area 
and away from doors, windows and vents.

Содержание 100520









































Отзывы: