Champion Power Equipment 41331, Руководство пользователя и инструкции по эксплуатации

Страница: 10 / 31

Controls and Features
6 Rev 41331-20110330 English
Power Panel
(1) Ignition Switch
– Turn the ignition
key to the “On” position to start the
generator.
(2) Circuit Breaker
– Protects the
ignition switch against electrical overload.
(3) Intelligauge
– Three mode digital
meter for running hours, voltage and hertz.
(4) LED Switch – Controls the LED panel
lights.
(5) 120 V 30 A Twist-Lock – Protected by
a 30 A push-to-reset circuit breaker. This
receptacle powers 120 Volt AC, 60 Hz, single
phase loads requiring up to 30 A or 3600
Watts of power.
(6) 120/240 V 30 A Twist-Lock –
protected by a 30 A push-to-reset circuit
breaker on each 120 Volt leg of the
receptacle. This receptacle powers 240 Volt
AC, 60 Hz, single phase loads requiring up
to 25 A or 6000 Watts of power. If an L14-
30P plug is wired for only one 120 Volt leg
(3-wire connection) then this receptacle
powers 120 Volt AC, 60 Hz, single phase
loads requiring up to 30 A or 3600 Watts of
power.
(7) Circuit Breakers – Protects the
generator against electrical overload.
(8) 120 V 20 A Duplex – each duplex is
protected by a 20 A push-to-reset circuit
breaker to operate 120 Volt AC, single phase,
60 Hz loads requiring up to 20 A 0r 2400
Watts of power.
(9) Ground Terminal
– Consult an
electrician for local grounding regulations.