background image

100862 - FRONT TiNE TiLLER

iMPORTANT SAFETY iNSTRUCTiONS

4

iMPORTANT SAFETY iNSTRUCTiONS

This machine meets voluntary safety standard B71.8 – 1996, 
which is sponsored by the Outdoor Power Equipment Institute, 
Inc., and is published by the American National Standards 
Institute.

Training

1.  Carefully read this Operator’s Manual and any other literature 

you may receive. Be thoroughly familiar with the controls and 
the proper use of the tiller and its engine. Know how to stop 
the unit and disengage the controls quickly.

2.  Never allow children under age 16 to operate the tiller. Never 

allow adults to operate the tiller without  proper instruction.

3.  Keep the area of operation clear of all persons, particularly 

children and pets.

4.  Keep in mind that the operator or user is responsible for 

accidents or hazards occurring to other people, their property, 
and themselves.

Preparation

1.  Thoroughly inspect the area where the tiller is to be used and 

remove all foreign objects.

2.  Be sure all tiller controls are released and both wheels are in 

the Wheel Drive position before starting the engine. 

3.  Do not operate the tiller without wearing adequate outer 

garments. Avoid loose garments or jewelry that could get 
caught in moving parts.

4.  Do not operate the tiller when barefoot or wearing sandals, 

sneakers, or light footwear. Wear protective footwear that will 
improve footing on slippery surfaces.

5.  Do not till near underground electric cables, telephone lines, 

pipes or hoses. If in doubt, contact your telephone or utility 
company.

6.  Warning: Handle fuel with care; it is highly flammable and its 

vapors are explosive. Take the following precautions:

6a. Store fuel in containers specifically designed for this 

purpose.

6b. The gas cap shall never be removed or fuel added while 

the engine is running. Allow the engine to cool for several 
minutes before adding fuel.

6c. Keep matches, cigarettes, cigars, pipes, open flames and 

sparks away from the fuel tank and fuel container.

6d. Fill fuel tank outdoors with extreme care. Never fill fuel 

tank indoors. Use a funnel or spout to prevent spillage.

6e. Replace all fuel tank and container caps securely.

6f.  If fuel is spilled, do not attempt to start the engine, but 

move the machine away from the area of spillage and 
avoid creating any source of ignition until fuel vapors have 
dissipated.

7.  Never make adjustments when engine is running (unless 

recommended by manufacturer).

Operation

1.  Do not put hands or feet near or under rotating parts.

2.  Do Not attempt to till with tines in reverse

3.  Exercise extreme caution when on or crossing gravel drives, 

walks, or roads. Stay alert for hidden hazards or traffic. Do 
not carry passengers.

4.  After striking a foreign object, stop the engine, remove the 

wire from the spark plug and prevent it from touching the 
spark plug. Thoroughly inspect the machine for any damage 
and repair the damage before restarting and operating the 
machine

5.  Exercise caution to avoid slipping or falling.

6.  If the unit should start to vibrate abnormally, stop the engine, 

disconnect the spark plug wire and prevent it from touching 
the spark plug, and check immediately for the cause. 
Vibration is generally a warning of trouble.

7.  Stop the engine, disconnect the spark plug wire and prevent 

it from touching the spark plug, whenever you leave the 
operating position, before unclogging the tines, 
or when making any repairs, adjustments or inspections.

8.  Take all possible precautions when leaving the machine 

unattended. Stop the engine. Disconnect the spark plug wire 
and move it away from the spark plug.

9.  Before cleaning, repairing, or inspecting, stop the engine and 

make certain all moving parts have stopped. Disconnect the 
spark plug wire and prevent it from touching the spark plug to 
prevent accidental starting.

10. Never use the tiller unless proper guards, plates, or other 

safety protective devices are in place.

11. Do not run the engine in an enclosed area. Engine exhaust 

contains carbon monoxide gas, a deadly poison that is 
odorless, colorless, and tasteless.

12. Keep children and pets away.

13. 

Be aware that the tiller may unexpectedly bounce 
upward or jump forward if the tines should strike 
extremely hard packed soil, frozen ground, or buried 
obstacles like large stones, roots, or stumps.

 If in 

doubt about the tilling conditions, always use the following 
operating precautions to assist you in maintaining control of 
the tiller:

Содержание 100862







































Отзывы: