background image

3

ENGLISH

 

100220

SAFETY RULES

Engine exhaust contains carbon monoxide, a 
colorless, odorless, poison gas. Breathing carbon 
monoxide will cause nausea, dizziness, fainting or 
death. If you start to feel dizzy or weak, get to fresh 
air immediately.

DANGER

Operate engine outdoors only in a well ventilated 
area DO NOT operate the engine inside any 
building, including garages, basements, 
crawlspaces and sheds, enclosure or compartment, 
including the engine compartment of a recreational 
vehicle. DO NOT allow exhaust fumes to enter a 
confined area through windows, doors, vents or 
other openings. 

DANGER CARBON MONOXIDE

using an engine indoors 

CAN KILL YOU IN 

MINUTES.

Rotating parts can entangle hands, feet, hair, 
clothing and/or accessories. Traumatic amputation or 
severe laceration can result.

DANGER

Keep hands and feet away from rotating parts. Tie up 
long hair and remove jewelry. Operate equipment with 
guards in place. DO NOT wear loose-fitting clothing, 
dangling drawstrings or items that could become 
caught.

Read this manual thoroughly before operating your 
engine. Failure to follow instructions could result in 
serious injury or death.

WARNING

The engine exhaust from this product contains 
chemicals known to the state of California to cause 
cancer, birth defects, or other reproductive harm.

WARNING

Sparks can result in fire or electrical shock.

DANGER

When servicing the engine:

Disconnect the spark plug wire and place it where 
it cannot contact the plug. DO NOT check for spark 
with the plug removed. Use only approved spark 
plug testers.

Running engines produce heat. Severe burns can 
occur on contact. Combustible material can catch 
fire on contact.

DO NOT touch hot surfaces. Avoid contact with 
hot exhaust gases. Allow equipment to cool before 
touching. Maintain at least three feet of clearance 
on all sides to ensure adequate cooling. Maintain 
at least five feet of clearance from combustible 
materials.

WARNING

Содержание 100220






















Отзывы: