Champion Global Power Equipment 100520 Скачать руководство пользователя | Manualshive

Страница: 14 / 37

background image

100520 - 8750W PORTABLE INVERTER GENERATOR

CONTROLS AND fEATURES

14

fCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

1a. This device may not cause harmful interference.

1b. This device must accept any interference received,

including interference that may cause undesired
operation.

2. Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to
operate the equipment.



NOTICE

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and
receiver.

–

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult dealer or an experienced radio/TV technician for help.

Parts Included

Accessories

Flexible Oil Funnel .....................................................................1
Dual 2.4A Port USB Adapter ......................................................1
Battery Charging Cables ............................................................1

Assembly Parts

Wheels
  8 in. (20.3 cm) Never Flat Wheel (A) ..................................2
  Roll Pin (B)........................................................................2
  Large R-clip (C) ................................................................2
Engine Vibration Mounts
  Support Leg with Vibration Mounts (D) ..............................1
  Flange Bolt (M8×16) (E) ....................................................2
Folding Handle
  Handle (F).........................................................................1
  Flange Bolt (M6×30) (G) ...................................................4

A

D

f

G

B

E

C

«
...
12
13
14
15
16
...
»

Содержание 100520






































Отзывы:

Нет отзывов

Похожие инструкции для 100520

Бренд: Makita Страницы: 21

Бренд: Mag One Страницы: 8

Бренд: Agilent Technologies Страницы: 78

Бренд: Briggs & Stratton Страницы: 5

Бренд: QFX Страницы: 11

Бренд: Wacker Neuson Страницы: 38

Бренд: Raven Страницы: 80

Бренд: ekston Страницы: 10

Бренд: Greenlee Страницы: 22

Бренд: Logik Страницы: 36

VABF-S4-CB-VH Series

Бренд: Festo Страницы: 32

Бренд: Firman Страницы: 41

Бренд: Firman Страницы: 42

Бренд: Firman Страницы: 111

Бренд: EOD Страницы: 8

Бренд: Dual Страницы: 16

Бренд: Audiovox Страницы: 33

Бренд: Kirisun Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды