Chamiin I&C 0024-1236, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 18

Operation Portable Bluetooth Printer
６
Instruction Handy700-BT
• Bluetooth Information.
Address : xxxxxxxxxxxx
Name : HANDY700
Pin Code : 0000
Set-Up Mode
The printer has been set up at the factory with the following default parameters:
Baud rate : 9600 bps
Handshaking : DTR
Country
: U.S.A.
Print mode : Text (upright)
Paper : Normal paper
Density : 100%
IrDA : IrDA-Off
If necessary, the default parameters can be changed as follows:
1. With the printer initially switched OFF, press and hold down the SEL
pushbutton; then switch the printer ON.
2. The printer now goes into its set-up mode and prints its current parameter
status. Observe that the green Power LED flashes to indicate that the printer
is in its set-up mode.
Note: If no pushbuttons are pressed within 15 seconds, the set-up mode is
automatically terminated without changing the original parameters.
3. Baud rate is first parameter printed. Pressing the FEED button causes the
value of that parameter to change in the sequence shown in the following
table.
SEL Button FEED Button
Baud rate
Handshaking
Country
Print mode
Paper
Density
IrDA
300~115,200
DTR, X-on/X-off
U.S.A., Korea, Cyrillic, Denmark2, Norway, Japanese, Spain,
Italy, Sweden, Denmark1, U.K., Germany, France
Text(upright), Data(inverted)
Normal paper, Reprint paper
50~150% in 5% steps
IrDA-Off, IrDA-SIR, HP-Ir